British Gypsum Gyproc DriWall Adhesive
Bonds Plasterboard to walls simply and quickly
£12.22 (£14.66 inc VAT)
Product Code: BGP-DWAEstimated delivery in 3-5 working days
Free delivery for orders over £350.00
ADDITIONAL INFORMATION
• Brand
British Gypsum Gyproc DriWall Adhesive
• Bag Size
25kg
• Recommended Dab Size
50-75mm wide and 250mm long
• Recommended Dab Thickness
10-25mm
• Volume of Water Required
13.5 - 14.5 litres per 25kg bag
• Working Time
Up to 90 minutes
• Setting Time
Minimum 2 hours
• Shelf Life
4 months when stored correctly
• Storage
Store inside on a flat, stable surface, away from moisture, heat, or direct sunlight
• Environmental Effects
Not suitable for use on frozen backgrounds; should not be exposed to temperatures above 49° C once set. Should not be exposed to moisture repeatedly or for long periods.
British Gypsum Gyproc DriWall Adhesive is designed for efficient dot and dab applications, ensuring a level surface when attaching plasterboard to masonry walls. Its smooth mix and long working time make it ideal for achieving a professional finish with minimal effort.
• Easy to Mix and Apply
The adhesive is smooth to mix and easy to apply, ensuring a quick and efficient installation process.
• Long Working Time
Provides a long working time, allowing for adjustments and ensuring a perfect finish.
• Versatile
Suitable for bonding plasterboard to various backgrounds, including masonry walls.
• Level Surface
Helps achieve a level wall, ideal for plastering or decorating.
• EN 14496:2005
Gypsum-based adhesives for thermal / acoustic insulation composite panels and plasterboards. This standard defines the requirements and test methods for gypsum-based adhesives.
What is Gyproc DriWall Adhesive suitable for? It is used for dot and dab applications to bond plasterboard to masonry walls, ensuring a level surface for plastering or decorating.
How do I prepare the Gyproc DriWall Adhesive mix? Add 13.5-14.5 litres of clean, fresh, cold water per 25 kg bag into a clean mixing bucket. Gradually add the powder and mix until smooth.
Do I need to prepare the area before applying the adhesive? Yes, ensure the background is clean and dry. Use water or Thistle GypPrime for suction control if needed.
How do I apply the adhesive? Apply dabs in a regular pattern, ensuring a minimum contact area of 20% between the board and background. Use a continuous fillet around the perimeter for optimum airtightness.
What is the working time for this product? The working time is approximately 90 minutes.
How long does it take for the adhesive to set? It takes a minimum of 2 hours to set, but it is recommended to leave it for 3-6 hours until fully set.
How much adhesive will I need? A 25 kg bag is suitable for two 1200x2400 mm plasterboards under normal conditions.
DOWNLOADS - British Gypsum PDS Thistle BondingCoat